FITTING A SLINGGUARD INTO THE BOOT / REAR AREA

To fit your SLINGGUARD into the boot area of a SUV or Station Wagon, just do up the back two zips, then push the back up to the back of the back seat.  

You then lean over from the back seat to do up the two headrest leads, as it is easier to do it from the back than when you are sitting on it!!  When done up, go around to the back of the car, then push it back into place.  All cars are different in this area, so just adjust it around so that it sits neatly with the two sides up.  Make sure that the front headrest leads are put under the SLINGGUARD so that the clips don't get broken.  It can be used on either side. 

Should you find that the sides come down a little - if the sides are smooth, then stick a little piece of hook velcro to the side, and tack a little piece of the soft side velcro to the SLINGGUARD itself so that it will stay stuck up.  If the sides are soft material, then tack a bit of hook velcro to the SLINGGUARD, and it will stick to the sides and hold itself up. 

This is not normally needed. 

DON’T LET TRAVEL BE A HASSLE!

Travelling with your best friend will be pleasurable for both of you when using SLINGGUARD products.
You will have peace of mind knowing he/she is receiving the best of comfort, care and safety – and your best friend will lose any anxiousness and travel totally relaxed.